HCS-60 HYDRAULIC CYLINDER SERVICER

This model, shown at the beginning of this section, is equipped with a 7 1/2 HP Hydraulic Power Supply that powers seven hydraulic functions that provide maximum productivity and ease of operation. There are two hydraulic torquing devices, one for removing threaded cylinder caps and highly torqued cap bolts (can also be used to remove piston nuts on cylinders too long to fit in Servicer), the other for removing highly torqued piston retaining nuts. A High Torque Hydraulic Nut Runner is also provided. Set up functions are hydraulically assisted. Will service all current CAT^® cylinders.

SPECIFICATIONS:

Maximum Cylinder Length - 24 ft. (7.32 m)
Maximum Cylinder Diameter - 24 ins. (609 mm)
Maximum Available Torque - 60,000 lb/ft. (8300 kg/m)
Maximum Cap Torque - 25,000 lb/ft. (3458 kg/m)
Maximum Rod Extraction Force - 6 Tons
Rod Extraction Speed - 4 ft./16 secs. (1219 mm/16 secs)
7 RPM Hydraulic Nut Runner Produces 4000 lb/ft. Torque (553 kg/m)
Electric Pump - All Voltage, 50/60 Hz - 3 Phase, 7 1/2 HP
Push Button Pendant Control with 30' of Cable

AVAILABLE CERTIFIED

"CONFORMITE EUROPEENE" ORDER AS - HCS-60-CE

This model is essentially the same as the HCS-60, has identical features, but will handle longer cylinders. Will service all current CAT^® cylinders and Hitachi^® 3500 Boom Cylinders.

AVAILABLE CERTIFIED

"CONFORMITE EUROPEENE" ORDER AS - HCS-60-LCE